LevitonODS10-IDW Decora 120/277-Volt Wall Switch Occupancy Sensor, White

Q: Hi, can i use them in 3 way? I need to place one on the top and another one on the bottom of my stairs.

Yes according to the instruction manual here: http://ecx.images-amazon.com/images/I/71rJUsXIQ3S.pdf (link above feedback on Amazon) Connect Black to blacks. Connect the blue wire on each to the black wire going to the light. That will allow both to sense motion at same time. Can also be used with a normal 3 way switch where blue is the carrier wire.

Q: will thsi work in Europe?

all depends on your voltage in Europe. Seems to me if it is 110 to 277 volts there should not be a problem. anything more than that and it probably will not work. best bet would be get ahold of Leviton.

Q: can i dissable the motion sensor? and just use it as an on/off switch?

On some wall mounted motion sensors there is a switch with OFF-ON-AUTO functions. This is referred to as manual on/off override. It allows you to easily switch between full manual and automatic modes. This unit is not so equipped. It can be setup to allow manual on off functions, but this requires gaining access to the setup controls (under the cover). To go back to full automatic operation you once again have to change the internal settings. Not exactly convenient, or practical if you wish to change back and forth on a routine basis.

Q: Is a neutral line required?

Like most switches, a neutral does not attach to the switch. This dimmer has 3 wires, hot, load and ground as does a typical single pole light switch. Also, it is not powered through the ground as someone else stated. Read the user guide if you don't understand this. The neutral wire runs from the light fixture(s) to the neutral in your load center. The circuit requires a neutral. If you are replacing a standard single pole switch this device should work fine. In a 3-way circuit, the switches connect in parallel to the line (hot) and load (fixture) so only 2 wires are required between the switches unlike a typical 3-way circuit which requires 3 wires between the switches, so it you are replacing standard light switches you will have an extra wire.

Product ID: 299599023

Secure Transaction

Details

Operation mode
automatic
Operating voltage
120 Volts
Contact type
Normally Open
Connector type
Crimp
Brand
Leviton

⏳30 sec to 30 min customizable delay

⚡120/277V dual voltage power

👁️‍🗨️180° adjustable field of view

Frequently Bought Together

Leviton ODS10-IDW Decora 120/277-Volt Wall Switch Occupancy Sensor, White

Leviton + 80601-W 1-Gang Decora/GFCI Device Wallplate + Midway Size + Thermoset + Device Mount + White

Description

💡 Light smarter, live brighter — never be left in the dark again!

AMBIENT LIGHT OVERRIDE - Prevents lights from turning on when natural light is sufficient, maximizing savings.
MANUAL OVERRIDE CONTROL - Push-button switch lets you instantly take control without sacrificing automation.
CUSTOMIZABLE SENSITIVITY - Adjust horizontal detection from 32° to 180° for tailored coverage in any space.
SEAMLESS ENERGY EFFICIENCY - Automatically powers lights only when needed, slashing wasted energy and costs.
WIDE ANGLE SMART DETECTION - 180-degree field of view covers up to 2,100 sq ft, ensuring no corner goes unnoticed.

The Leviton ODS10-IDW is a commercial-grade, passive infrared occupancy sensor wall switch designed for 120/277V systems. Featuring a 180-degree adjustable field of view and ambient light override, it covers up to 2,100 sq ft and offers customizable time delays from 30 seconds to 30 minutes. Its manual push-button switch provides flexible control, making it an energy-efficient solution for modern workplaces and homes.

Specifications

Manufacturer	Leviton
Part number	ODS10-IDW
Item Weight	109 g
Item model number	ODS10-IDW
Size	1-Pack
Color	White
Finish	White
Material	Plastic
Pattern	Sensor
Shape	Rectangle
Power source type	Corded Electric
Item Package Quantity	1
Number Of Pieces	10
Switch Type	1-way
Plug Profile	Wall Mount
Switch Style	Push Button
Specification met	Ip54
Included components	Leviton Ods10-Idw Infr Occpncy Snsor
Batteries Included?	No
Batteries Required?	No